Stump grinding uses a machine with a spinning cutting wheel that chips a stump away into small pieces of wood. The wheel is moved back and forth across the stump until it is taken down to the agreed level below or near the ground.
What Happens on Grinding Day
The area around the stump is checked first for rocks, sprinkler heads, and anything buried nearby. Because grinding goes below the surface, buried lines are worth thinking about ahead of time. Texas 811 advises that every project involving digging should have utilities located before ground is broken.
Once the machine is in place, the operator sweeps the wheel across the top of the stump, lowers it a little, and repeats. Large surface roots right next to the stump can often be ground down in the same pass.
What’s Left Behind
Grinding turns the stump into a pile of wood chips mixed with soil. Those chips usually fill the spot where the stump was. Depending on what was agreed, they may be raked out, left in place, or handled another way. Grass does not always grow well straight into fresh chips, so some homeowners replace part of them with soil before seeding.
Grinding leaves most of the root system in the ground. If you need the stump and main roots out, stump removal is a different service.
Why It Is Not a DIY Job
Stump grinders throw chips and debris with force, and hidden rocks or lines can turn a simple job into a dangerous one.
If you have a stump that’s in the way, call 817-587-4286 to describe the stump and its surroundings.
Leave a Reply